Is sanding and refinishing hardwood floors less expensive?

You might not know what kind of hardwood you’re working with if your floor is old and damaged and came with the house or if you just acquired a fixer-upper. That’s fine because there are various approaches to determining the answer.

The simplest method is to locate a floor vent that you can raise to inspect a cut edge of the wood. Does the flooring’s cut edge resemble a layer cake with defined layers or a thicker base with a thin veneer? After then, it’s engineered.

A solid hardwood plank, on the other hand, is made entirely of one type of wood and is normally 34 to 1 inch thick.

It’s easy to confuse a subfloor or plywood buildup for flooring while using this strategy. As a result, removing a plank from the floor is another possibility. If it is more damaged, it’s preferable to take it from a closet or another inconspicuous location. visit the best floor sanding in Adelaide for more info.

How much does it cost to have hardwood floors refinished by a professional?

Hardwood refinishing costs vary depending on your region, the type of floor, its current state, and (of course) its square footage, just like everything else in the home remodelling market. However, if you employ a professional to refinish your flooring, here are some ballpark figures.

Expect to pay $1.50 to $4 per square foot, or $340 to $900 for a 15-by-15-foot room, to thoroughly refinish a hardwood floor, including sanding down the top layer to bare wood putting several layers of new finish like polyurethane.

If your floor is slightly worn but generally in good shape, you may be able to avoid sanding by just recoating it. This will typically cost $225, or $1 per square foot.

Is it cheaper to refinish hardwood floors than to replace them?

Refinishing your hardwood floors is less expensive than replacing them! When compared to the expense of new floors, refinishing hardwood floors is a bargain.

DIY Cost to Refinish Hardwood Floors

If you’re doing this project on your own, there are a few costs to consider:

  • You’ll need to rent an upright sander, which runs about $60 per day. If you use a dustless sander, that figure rises.
  • Depending on the thickness and quality, finishes can cost anywhere from $40 to $90 per gallon.
  • The average cost of stain is $0.33 per square foot.
  • Sandpaper, smaller tools like chisels and levels, and enough plastic sheeting and materials to keep the dust contained are also required.

Overall, refinishing hardwood floors on your own will cost between $1.50 and $5.00 per square foot. Of course, the quality of the materials you select and the costs of local tool rental are the most important considerations. In any event, it will be less expensive than installing engineered hardwood flooring, so that’s a plus.

Is it better to restore existing hardwood floors or to install new hardwood?

This is dependent on several things, including the condition/age of your hardwood, how much you like your current hardwood, and your budget.

In general, refinishing your hardwood floors will nearly always be less expensive.

Can you refinish hardwood floors without sanding?

Without sanding, it’s impossible to refinish hardwood floors properly. The old finish, scratches, dings, and discolouration are all removed by sanding. Consider screening and recoating instead if your feet have a low sheen and only minor scuffing.